Jiangyin Yoobond New Composite Materials Co.,Ltd

Discoloration and discoloration of plastic board: The discoloration and discoloration of  Aluminum Composite Panel  are mainly caused by improper selection of sheet materials. Aluminum-plastic board is divided into indoor board and outdoor board. The surface coatings of the two boards are different, which determines its different applications. The surface of the board used in the interior is generally sprayed with a resin coating. This coating cannot adapt to the harsh outdoor natural environment. If it is used outdoors, it will naturally accelerate its aging process and cause discoloration and discoloration. The surface coating of outdoor aluminum-plastic board is generally selected from the anti-aging and UV-resistant polyfluorocarbon coating, which is expensive. Some construction units have deceived the owners, posing as anti-aging and anti-corrosion high-quality fluorocarbon boards with indoor boards, squeezing unreasonable profits, and causing serious discoloration and discolor

1. Aluminum honeycomb panel in place Aluminum Honeycomb Panel China  is placed in a dedicated venue to minimize the adverse effects on each other. After the aluminum honeycomb panels are in place, they should be stacked neatly, and the aluminum honeycomb panels should be laid flat on the ground. Use wooden blocks every 3 meters below, and take good isolation measures and warning signs to prevent aluminum honeycomb panels from being stepped on and crushed. Because aluminum honeycomb panels are longer and relatively heavy, workers must be very careful during handling, and they must be protected from being cut by steel plates, and they must also be protected from breakage. 2. Aluminum honeycomb panel lifting Pre-drill 2 circular holes in the upper part of the aluminum honeycomb panel, make hooks with steel bars, and hook in the middle hole. The hooks are connected with the wire rope of the hoist. Before lifting the aluminum honeycomb panel, manually lift the color panel against the

Classification and specifications of  Aluminum Composite Panel : 1. Classification of aluminum composite panels: There are many varieties of aluminum composite panels, and it is a new type of material. Therefore, there is no unified classification method, which is usually classified according to use, product function and surface decoration effect. . (1) Classification by use: a.  Aluminium Composite Panel Wall Cladding : The minimum thickness of the upper and lower aluminum plates is not less than 0.50 mm, and the total thickness is not less than 4 mm. The material of aluminum should meet the requirements of GB/T 3880. Generally, aluminum alloy sheets of 3000, 5000 series should be used. The coating should be coated with fluorocarbon resin. b. Aluminum-plastic composite panel for exterior wall decoration and advertising: The upper and lower aluminum panels shall be rust-proof aluminum with a thickness of not less than 0.20mm, and the total thickness shall be not less than 4mm. The

As an  Aluminum Composite Panel Supplier ,  let’s first take a look at the material and structure of aluminum composite panels: aluminum-plastic composite panels are a new type of decorative materials with a series of excellent properties. They will soon be in the field of curtain walls, interior and exterior decoration, etc. Widely used, it has created a new world of contemporary architectural decoration. The so-called aluminum panel refers to a composite material made of aluminum and plastic. Specifically, the aluminum plate and the plastic core material are bonded and composited by a special adhesive under certain process conditions. In practice, it is generally used as a front and back aluminum plate for painting, and then with a plastic core material. The front panel is typically coated with a decorative coating and the back panel is coated with a protective coating. Regarding the structure of the aluminum-plastic panel, it is generally a sandwich structure, which is a metaphor o