Jiangyin Yoobond New Composite Materials Co.,Ltd

  As a   Metal Composite Panels Factory , share with you. Material and structure Aluminum veneer refers to a building decoration material that is processed by fluorocarbon spraying technology after chromization and other treatments. Fluorocarbon coating mainly refers to polyvinylidene fluoride resin (KANAR500), divided into three types: primer, topcoat and varnish. The spraying process is generally divided into two coatings, three coatings or four coatings. Fluorocarbon coating has excellent corrosion resistance and weather resistance, can resist acid rain, salt spray and various air pollutants, has excellent cold and heat resistance, can resist strong ultraviolet radiation, and can maintain long-term color and non-chalking ,long lasting. The aluminum veneer curtain wall is made of high-quality and high-strength aluminum alloy plates, the usual thickness is 1.5, 2.0, 2.5, 3.0MM, the model is 3003, and the state is H24. The maximum size of conventional materials is 1220MM×2440MM. Its st

  The service life of the aluminum veneer curtain wall is relatively long. It not only has good self-cleaning and corrosion resistance, so it does not need long-term maintenance. However, some wall maintenance is still required during use, so as to make aluminum The veneer curtain wall shows the beauty and safety of the building for a long time. So, how to maintain the aluminum veneer curtain wall in use? The following four points are the key points that   Perforated Metal Sheets Factory   will tell you today. 1. During the warranty period, the aluminum veneer curtain wall shall be regularly inspected and visited by the supplier, and hidden quality hazards shall be eliminated in time. 2. Check the rubber strip and glue injection at any time. If the aluminum veneer curtain wall is found to be off or damaged, it should be replaced or repaired in time. Note that when repairing, you must wait until fully cured (24h) before proceeding. 3. Surface repair of aluminum veneer curtain wall: repa

  As a   Metal Composite Panels Factory , share with you. The general aluminum plate material will be set according to the corresponding size specifications, you can consult the merchant for some opinions and reference when choosing. The first choice is the material of the aluminum veneer. Generally, common aluminum veneer materials mainly include ordinary aluminum alloy profiles, aluminum-magnesium alloy profiles, and aluminum-manganese alloy profiles. In terms of hardness and strength, the properties of the above three materials increase in order. Secondly, refer to the treatment method of the aluminum plate surface. At present, the processing methods of aluminum plate materials mainly include four methods: spraying, baking, roller coating, and laminating. The service life of the aluminum plate material under the treatment of spraying and baking paint is relatively short, and there may be color difference during surface treatment. The aluminum veneer material under the roller coating