Jiangyin Yoobond New Composite Materials Co.,Ltd

In the current state of environmental protection and energy conservation and fire safety, many public buildings choose to use aluminum veneer,   Aluminum Honeycomb Panel , and aluminum energy-saving composite panels for interior and exterior decoration. Due to its good fire resistance, installation is fast and convenient and is increasingly recognized by the industry . Now the industry requires the use of integrated panels for construction and decoration, and aluminum products are energy-saving, recyclable and highly plastic, and can be combined with other materials into many decorative new products, such as honeycomb energy-saving integrated panels and stone honeycomb energy-saving composite panels. These materials can meet the requirements of beautiful decoration and high fire resistance. It can be said that there is still a large market for aluminum plates and their composite products.  Aluminum Composite Panel  is a composite material processed by chemically-treated coated aluminu

As an  Aluminum Composite Panel Supplier , I would like to share with you the solutions to the problems in the aluminum-plastic panel composite process. Lotus leaf edge The lotus leaf edge is the wave of the board edge. This is a common problem and is mainly caused by waves on the edges of the aluminum coil. The wave of aluminum coil is a rolling quality problem. Even the severe wave deformation cannot be completely solved even after the drawing, bending, and correction of the finishing process. In addition, in the baking paint, the temperature of the aluminum coil is too fast. If the temperature of the aluminum plate rises to a very high temperature as soon as it enters the oven, the aluminum plate will expand rapidly. This forms a great contrast with the unheated aluminum plate in the boundary area, which will definitely lead to the surface The thermal deformation caused by the lotus leaf edge. It is difficult to require the absolute flatness of the aluminum coil processing bo

The structural materials of yachts are mainly wood, steel, aluminum alloy, and glass fiber reinforced plastic. The materials with the same strength, the lighter the weight, it means saving power and lifting speed, which is beneficial to reducing emissions! The unique structure of  Aluminum Honeycomb Composite Panel , through the bonding of surface layer boards with different strength, to achieve higher strength and lighter weight process requirements! When selecting hull materials, in addition to mechanical properties, processability and economy are also important factors. In recent years, due to increased environmental awareness, the impact of materials and waste on the environment also needs to be evaluated. As a plastic honeycomb material produced by  Metal Composite Panels Factory , it uses imported raw materials and sophisticated technology to minimize the consumption of resources and energy. At the Sydney International Yacht Show, more and more yachts use composite materia

When  Aluminum Composite Panels  are used to decorate the surface of buildings, there are generally gaps of a certain width between the plates. For aesthetic needs, black sealant is usually filled in the gap. In order to save time, some construction workers do not need paper tape to ensure the neatness and regularity of the glue, but instead use the protective film on the surface of the aluminum-plastic board as a substitute. Because the protective film will tear to different degrees when cutting aluminum-plastic panels, it is impossible to use the plastic film as a substitute for protective tape to tidy up the glue seams. Common quality problems and solutions in the process of aluminum-plastic composite There are two main quality problems that often occur in aluminum-plastic panels, one is the coating quality; the other is the composite quality. Coating quality problems occur in the pretreatment of aluminum plates and in the process of painting and baking. The composite quality

As an  Aluminum Composite Panel Supplier , share the construction process with you. Edge installation: The corners, ends, and sides of the wall panel should have closing edges. The types are: outside corner, outside table, daughter wall cap, door outside, door outside, window outside, window outside. , Under the window, inside corners, seams, etc. The cross-sectional shape of the edge board must focus on waterproofing, and also consider strength and stiffness. At the same time, it must be beautiful, elegant, and easy to manufacture and install. Most of the accessories such as edge board and corner board are located at the corners of the building, which is more conspicuous. Its good shape will enhance the effect of the building facade. Checking the width and angle of the bending surface is to ensure the appearance quality of the building. Important indicators. General requirements for edge installation: straight edge, interface fit, natural corners, and reliable connection. Edges o