What is the classification of Aluminum Composite Panel?

Aluminum Composite Panel has a variety of classification methods for protective films, which are generally classified according to the protective film substrate, adhesive or use characteristics. As an Aluminum Composite Panel Supplier, let’s share it with you.
(1) According to the protective substrate
It can be roughly divided into two categories: PE (polyethylene) protective film and PVC (polyvinyl chloride) protective film. If further subdivided according to the thickness of the substrate, the thickness is 20 to 120 μm, or even thicker; if the color of the substrate is divided, there may be a colorless transparent film, a transparent blue film, a white film, a black and white film, and the like.
(2) According to the adhesive
Can be divided into rubber type pressure sensitive adhesive and acrylate pressure sensitive adhesive.

Aluminum Composite Panel
The rubber type pressure sensitive adhesive can be further subdivided into a solvent type rubber pressure sensitive adhesive and a crosslinked rubber pressure sensitive adhesive. Acrylate pressure sensitive adhesives are classified into solvent-based acrylate pressure-sensitive adhesives, emulsion-type acrylate pressure-sensitive adhesives, and water-dispersible acrylate pressure-sensitive adhesives.
At present, the domestic protective film used in the market of Aluminum Composite Panel is mainly a solvent-based acrylate pressure-sensitive adhesive protective film, and the imported protective film used on the Aluminum Composite Panel is mainly a rubber-based solvent-based protective film.
In addition, there are coextruded films, cast films, and electrostatic films which are not coated but still have self-adhesive properties.
(3) According to the characteristics of use
It can be divided into a protective film for ultraviolet protection for outdoor use, a protective film for laser cutting, a protective film for heat resistance, and an easily peelable protective film.

评论

发表评论

此博客中的热门博文

Repair the Surface of Aluminum Composite Panel

图片
Aluminum-plastic composite panel is a product that is often used in life. This type of product is used in many places. For many people, it has a very good effect. It is also often used in the home improvement industry, but because of the workmanship. There will be some differences between different types of plates, resulting in products that don’t look very good. What should we do to deal with this situation? First of all, we must understand what causes the color difference of the plates, and work with   Perforated Metal  Sheets Factory ! 1. Reasons for raw materials. The supplier is different. The difference of suppliers has a great influence on the control of color production. Almost all the raw materials of the paint factory come from different places. If different suppliers are required to prepare the same color, there are actually differences in raw materials. Sometimes the same supplier also has the problem of differences in raw materials of different habits. 2. Equipment reasons
阅读全文

Can the Aluminum Alloy of the Can Replace the Aluminum Alloy of the Aluminum Sheet?

图片
  As a   Perforated Metal Sheets Factory , share with you. As we all know, the curtain wall aluminum veneer is made of aluminum alloy. The Coca-Cola cans are also made of aluminum alloy. However, most people think that aluminum alloys are the same, and there is no difference. In fact, they are different. The aluminum alloy used in cans cannot meet the basic mechanical properties of curtain wall aluminum veneers. 3104 aluminum alloy is used for the can body, 5052 aluminum alloy is used for the lid and pull ring of the can; and the aluminum alloy used for the aluminum veneer of the curtain wall is 1100 and 3003 aluminum alloy. Because of the different models of aluminum alloys, their mechanical properties are also different. For example, the ultimate tensile strength of 6061 aluminum alloy is 124MPa, the tensile yield strength is 55.2MPa, the elastic modulus is 68.9GPa, and the bending ultimate strength is 228MPa. It is usually used in aviation and shipbuilding. The mechanical performanc
阅读全文

Is the Aluminum Veneer Curtain Wall Necessarily Better?

As a  Perforated Metal Sheets Factory , share with you. For users of aluminum veneer curtain walls, the choice of aluminum veneer thickness is very important, which is also a problem that has plagued many users who have just been in contact with aluminum veneer. Choosing a suitable thickness lays a good foundation for the later decoration project, and the quality of the later decoration effect, including aesthetics, durability, etc. In the end how to choose, listen to any suggestions of aluminum veneer manufacturers. First of all, it is necessary to consider how the environment is used. The natural environment is relatively harsh. In the case of windy and rainy years, the test of the aluminum veneer curtain wall is very large, so you need to choose a thicker aluminum veneer in order to be able to Strengthen the coefficient of wind resistance and pressure resistance to ensure the use effect. In general, most people use aluminum veneer with a thickness of 2.5mm or 3.0mm. In addition, for
阅读全文