Installation Precautions of Aluminum Composite Panel Interiors

  1. Connection of rivet
    The Aluminum Composite Panel can be connected with the panel or other materials by a suitable rivet. For outdoor or high humidity areas, it should use self-plugging rivet with a stainless steel core to avoid influencing the board of aluminum composite panel by corrosion, if you use rivet with an iron core, it must be extracted after connecting. The countersunk head rivet can just be used indoors.
  2. Screw fastener
    The fixed part should be used indoors
    The connection indoors can be used by different cephalic steel plate or screws. Those screws are not allowed to have thermal expansion displacement with the Aluminum Corrugated Composite Panels.
    The countersunk head rivet can be used for fixing aluminum composite panel, the aluminum face can be put into the panel by countersunk hole method, its hole in the aluminum panel is bigger than the diameter of screw rod.
  3. Plastic welding ( just used for PE core material)
    The connection of plastic by hot-air can also be used for the connection of aluminum composite panel, using heated air to melt polyethylene core and plastic welding rod of the aluminum composite panel by electrically heated welding gun, then connecting them after cooling.

评论

发表评论

此博客中的热门博文

What should I pay attention to before installing Splashback Aluminum Composite Panel?

图片
As an  Aluminum Composite Panels Factory , share with you. 1. Distinguish the aluminum-plastic panel of the inner and outer walls First of all, figure out whether the exterior wall decoration is the interior wall decoration. Generally speaking, the exterior wall decoration generally uses 4mm, 25-wire or more aluminum-plastic board. Only in this way can the quality of the decoration be ensured. Aluminum-plastic board, which can ensure the quality and reduce the cost. 2. Inspection of accessories Check horizontal and vertical connectors before construction, measure and adjust to reduce errors of  Splashback Aluminum Composite Panel . 3. Strictly follow the instructions to install aluminum-plastic board When installing the aluminum-plastic board, install it in the same direction as the arrow marked on the protective film to avoid color difference; the protective film on the board surface should be removed according to the date marked on the protective film, so as to ...
阅读全文

Aluminum Composite Panel Tips

图片
Let us first talk about the material composition of the  Aluminum Composite Panel , which plays a direct and decisive role in its use. It can be seen literally that it is a combination of aluminum and plastic. The characteristics of the composite board are that they combine the advantages of the two materials and overcome their own shortcomings. The two materials of aluminum and plastic are widely used, and the combination of the two makes the composite board have unique performance. The scope of use is even wider. The performance of aluminum-plastic composite board is mainly reflected in its fire and impact resistance. It is rich in color and will not damage its appearance during the changing seasons. Therefore, it is very suitable for the decoration of exterior walls and can replace the old materials. Used in the renovation of old walls, its texture is relatively light, easy to carry, and processing is very convenient, which can save a lot of manpower and material resources. In ...
阅读全文

How to Choose the Thickness of Aluminum Composite Panel?

图片
  As an   Aluminum Composite Panel Supplier , share with you. The aluminum veneer curtain wall has been developed into people’s lives so far. You can see the aluminum veneer wherever you go. For aluminum veneer consumers, how to choose the thickness of the aluminum veneer needs to pay attention to when buying. The thickness of the general aluminum veneer curtain wall ranges from 0.6mm to 5mm, and customers need to choose and purchase according to the actual situation. For exterior wall construction, the thickness of aluminum veneer is more carefully selected. Under normal circumstances, aluminum veneer with a thickness of 0.8mm or more will be used, because it is necessary to deal with natural storms or blizzards. If you choose to use too thin The aluminum veneer cannot be well guaranteed in terms of safety and service life. Especially the southern coastal areas will face the raging typhoon. This kind of bad weather will cause great damage to the aluminum veneer. If you do not...
阅读全文