Aluminum Composite Panel Decoration Notice

The Aluminum Composite Panel is a wall material that is often used when decorating walls. The Aluminum Composite Panel has many advantages that make it a good place for wall decoration. Its color is generally very bright, very conspicuous, and the surface is very smooth. When buying an Aluminum Composite Panel, you must choose a good aluminum composite panel brand. Let Aluminum PVC Foamed Composite Panel Supplier tell you what issues should be noticed when the Aluminum Composite Panel is being renovated.
First, the base surface of the plate should be dry and flat, and the bottom layer should be made of multi-layer board and blockboard to prevent cracking and deformation.
Aluminum Composite Panel

Secondly, when attaching the Decorative Films Composite Panel, it should be noted that the glue must be evenly distributed. When the super-diluent thinner is volatilized, it can be pasted by hand without touching it and tapped with a wooden hammer.
Third, the Decorative Films Composite Panel should be divided into several pieces according to the design requirements. It is not suitable for a whole or large area, otherwise, it will easily cause empty drum opening.
Fourth, the Joint Films Composite Panel joints are generally sealed with glass glue. The glass glue must be evenly filled when it is sealed. After drying, the surface should be cleaned to make the thickness of the lines consistent.
The above is what the Aluminum Composite Panel supplier should pay attention to when decorating the Aluminum Composite Panel. If you want to buy Decoration Composite Panels, please choose us, our factory produces products with excellent quality and reasonable price. Please feel free to contact us.

评论

发表评论

此博客中的热门博文

Repair the Surface of Aluminum Composite Panel

图片
Aluminum-plastic composite panel is a product that is often used in life. This type of product is used in many places. For many people, it has a very good effect. It is also often used in the home improvement industry, but because of the workmanship. There will be some differences between different types of plates, resulting in products that don’t look very good. What should we do to deal with this situation? First of all, we must understand what causes the color difference of the plates, and work with   Perforated Metal  Sheets Factory ! 1. Reasons for raw materials. The supplier is different. The difference of suppliers has a great influence on the control of color production. Almost all the raw materials of the paint factory come from different places. If different suppliers are required to prepare the same color, there are actually differences in raw materials. Sometimes the same supplier also has the problem of differences in raw materials of different habits. 2. Equipment reasons
阅读全文

Can the Aluminum Alloy of the Can Replace the Aluminum Alloy of the Aluminum Sheet?

图片
  As a   Perforated Metal Sheets Factory , share with you. As we all know, the curtain wall aluminum veneer is made of aluminum alloy. The Coca-Cola cans are also made of aluminum alloy. However, most people think that aluminum alloys are the same, and there is no difference. In fact, they are different. The aluminum alloy used in cans cannot meet the basic mechanical properties of curtain wall aluminum veneers. 3104 aluminum alloy is used for the can body, 5052 aluminum alloy is used for the lid and pull ring of the can; and the aluminum alloy used for the aluminum veneer of the curtain wall is 1100 and 3003 aluminum alloy. Because of the different models of aluminum alloys, their mechanical properties are also different. For example, the ultimate tensile strength of 6061 aluminum alloy is 124MPa, the tensile yield strength is 55.2MPa, the elastic modulus is 68.9GPa, and the bending ultimate strength is 228MPa. It is usually used in aviation and shipbuilding. The mechanical performanc
阅读全文

Is the Aluminum Veneer Curtain Wall Necessarily Better?

As a  Perforated Metal Sheets Factory , share with you. For users of aluminum veneer curtain walls, the choice of aluminum veneer thickness is very important, which is also a problem that has plagued many users who have just been in contact with aluminum veneer. Choosing a suitable thickness lays a good foundation for the later decoration project, and the quality of the later decoration effect, including aesthetics, durability, etc. In the end how to choose, listen to any suggestions of aluminum veneer manufacturers. First of all, it is necessary to consider how the environment is used. The natural environment is relatively harsh. In the case of windy and rainy years, the test of the aluminum veneer curtain wall is very large, so you need to choose a thicker aluminum veneer in order to be able to Strengthen the coefficient of wind resistance and pressure resistance to ensure the use effect. In general, most people use aluminum veneer with a thickness of 2.5mm or 3.0mm. In addition, for
阅读全文