Melt Blown Fabric for Industry Felt

 Melt Blown Fabric for Industry Felt Characteristics:

1. Strong ventilation, melt blown non-woven fabric from 100% fiber composition porous, good ventilation.
2. Good filtration, polypropylene chips without water absorption, moisture content is zero, easy to filter.
3. Good heat preservation.
4. Melt blown fabric for industry felt has the advantages of non-toxic, stable performance, no peculiar smell, and no irritation to the skin.
5. Good waterproof.

Melt Blown Fabric for Industry Felt
6. Good flexibility, by polypropylene spinning directly into a network of thermal bonding, product strength is better than ordinary staple fiber products, strength without direction, longitudinal and transverse strength is similar.
7. Antibacterial, chemical resistance, polypropylene is a chemical passive substance, not moth, and can isolate the presence of bacteria and insects in the liquid erosion; antibacterial, alkali corrosion, the finished product does not affect the intensity of erosion.
8. Environmental friendly, non-polluting, polypropylene chemical structure is not strong, the molecular chain structure is easy to break, thus effectively and quickly into the degradation process.

Packaging & Shipping:

PE bag with box, sponge mat inside of box to protect goods, will be sealed by tape in outside.
Packing in rolls with 85mm ID core or piece by piece, poly bags and with the woven bags outside, loading by 20 GP or 40 HQ.

PP Melt Blown Fabrics
1)1*20GP container can load about 3.0 tons(90 carton box);
2)1*40HQ container can load about 6.0 tons (180 carton box).
4 rolls per carton box for 175mm width,3 rolls per carton box for 260mm width.
1800 to 1850meter per roll, 8.0 KG per roll
Carton box size: 57*57*70.5CM

Product test report.Type: PP-M
No.SpecificationUnitsStandardAVMIN
1Basis Weightg/m225±124.924.7
2MD TensileN/5cm≥1012.211.3
3MD Elongation%≥303835
4CD TensileN/5cm≥88.98.3
5CD Elongation%≥303533
6Filtration FesistancePa≤302724
7BE%≥959695.5
Comprehensive judgment:Qualified
Test method for breaking strength and elongation:ISO9073-3-1989
Test method of filtration efficiency:ASTM F2101

评论

发表评论

此博客中的热门博文

Repair the Surface of Aluminum Composite Panel

图片
Aluminum-plastic composite panel is a product that is often used in life. This type of product is used in many places. For many people, it has a very good effect. It is also often used in the home improvement industry, but because of the workmanship. There will be some differences between different types of plates, resulting in products that don’t look very good. What should we do to deal with this situation? First of all, we must understand what causes the color difference of the plates, and work with   Perforated Metal  Sheets Factory ! 1. Reasons for raw materials. The supplier is different. The difference of suppliers has a great influence on the control of color production. Almost all the raw materials of the paint factory come from different places. If different suppliers are required to prepare the same color, there are actually differences in raw materials. Sometimes the same supplier also has the problem of differences in raw materials of different habits. 2. Equipment reasons
阅读全文

Can the Aluminum Alloy of the Can Replace the Aluminum Alloy of the Aluminum Sheet?

图片
  As a   Perforated Metal Sheets Factory , share with you. As we all know, the curtain wall aluminum veneer is made of aluminum alloy. The Coca-Cola cans are also made of aluminum alloy. However, most people think that aluminum alloys are the same, and there is no difference. In fact, they are different. The aluminum alloy used in cans cannot meet the basic mechanical properties of curtain wall aluminum veneers. 3104 aluminum alloy is used for the can body, 5052 aluminum alloy is used for the lid and pull ring of the can; and the aluminum alloy used for the aluminum veneer of the curtain wall is 1100 and 3003 aluminum alloy. Because of the different models of aluminum alloys, their mechanical properties are also different. For example, the ultimate tensile strength of 6061 aluminum alloy is 124MPa, the tensile yield strength is 55.2MPa, the elastic modulus is 68.9GPa, and the bending ultimate strength is 228MPa. It is usually used in aviation and shipbuilding. The mechanical performanc
阅读全文

Is the Aluminum Veneer Curtain Wall Necessarily Better?

As a  Perforated Metal Sheets Factory , share with you. For users of aluminum veneer curtain walls, the choice of aluminum veneer thickness is very important, which is also a problem that has plagued many users who have just been in contact with aluminum veneer. Choosing a suitable thickness lays a good foundation for the later decoration project, and the quality of the later decoration effect, including aesthetics, durability, etc. In the end how to choose, listen to any suggestions of aluminum veneer manufacturers. First of all, it is necessary to consider how the environment is used. The natural environment is relatively harsh. In the case of windy and rainy years, the test of the aluminum veneer curtain wall is very large, so you need to choose a thicker aluminum veneer in order to be able to Strengthen the coefficient of wind resistance and pressure resistance to ensure the use effect. In general, most people use aluminum veneer with a thickness of 2.5mm or 3.0mm. In addition, for
阅读全文