Repair the Surface of Aluminum Composite Panel


Aluminum-plastic composite panel is a product that is often used in life. This type of product is used in many places. For many people, it has a very good effect. It is also often used in the home improvement industry, but because of the workmanship. There will be some differences between different types of plates, resulting in products that don’t look very good. What should we do to deal with this situation? First of all, we must understand what causes the color difference of the plates, and work with Perforated Metal  Sheets Factory!

1. Reasons for raw materials. The supplier is different. The difference of suppliers has a great influence on the control of color production. Almost all the raw materials of the paint factory come from different places. If different suppliers are required to prepare the same color, there are actually differences in raw materials. Sometimes the same supplier also has the problem of differences in raw materials of different habits.

2. Equipment reasons. Different coating equipment also have certain differences in the strength and brightness of the coating. Different strength and brightness have a great impact on the human eye.

3. Process reasons. The difference in product production process will inevitably cause the difference in product color. For the current domestic aluminum-plastic composite panel manufacturers, it is very difficult to achieve the same process control conditions, so there must be certain color differences between different batches or even the same batch.

Aluminum composite panel is a new type of material now. Although it is a new material, its application range is indeed very wide. Nowadays, aluminum composite panels are slowly appearing like bamboo shoots after a rain. So let’s talk about how to repair the surface of aluminum composite panels. Right.

1. If the paint coating is scratched and defective, you can let the manufacturer or modulate the paint of the same color to cover it.

2. If the size of the material is improperly cut and the seam is not properly left, the seam is used at this time, and the fine seam will not be seen from close view.

3. If there are other foreign objects such as glue attached, you can use related solvents such as gasoline to scrub.

4. The glue on the splicing seams on the aluminum-plastic composite panel is all sealant, which has a fireproof effect. It is also used to buffer the expansion and contraction of the aluminum composite panel at different temperatures. The glass glue is often transparent or gray, and rarely It is seen that the glass seams with high transparency are black glue. It is a sealant, but glass glue can also be used instead. Normally, ordinary glass glue is used for indoor use, but professional glass glue is recommended for outdoor use.

5. If the color is bad or other reasons, and you do not want to dismantle and reinstall, you must cover it. There are many materials you can choose, such as light cloth photo printing, acrylic board, aluminum-plastic board, etc.

Our company also has Splashback Aluminum Composite Panel on sale, welcome to contact us.

评论

发表评论

此博客中的热门博文

Can the Aluminum Alloy of the Can Replace the Aluminum Alloy of the Aluminum Sheet?

图片
  As a   Perforated Metal Sheets Factory , share with you. As we all know, the curtain wall aluminum veneer is made of aluminum alloy. The Coca-Cola cans are also made of aluminum alloy. However, most people think that aluminum alloys are the same, and there is no difference. In fact, they are different. The aluminum alloy used in cans cannot meet the basic mechanical properties of curtain wall aluminum veneers. 3104 aluminum alloy is used for the can body, 5052 aluminum alloy is used for the lid and pull ring of the can; and the aluminum alloy used for the aluminum veneer of the curtain wall is 1100 and 3003 aluminum alloy. Because of the different models of aluminum alloys, their mechanical properties are also different. For example, the ultimate tensile strength of 6061 aluminum alloy is 124MPa, the tensile yield strength is 55.2MPa, the elastic modulus is 68.9GPa, and the bending ultimate strength is 228MPa. It is usually used in aviation and shipbuilding. The mechanical performanc
阅读全文

the Cause of the Uneven Surface of the Aluminum Panel

图片
The application of aluminum veneer is more and more widespread, and the uneven surface of the aluminum sheet is one of the problems that everyone often encounters. So what is the cause of the uneven surface of the aluminum veneer? In fact, there are many reasons, such as: aluminum sheet Extrusion die setting problems, support pad problems, etc.   Perforated Metal Sheets Factory   will tell you the specific reasons for the uneven surface of the aluminum veneer: (1) The length ratio of the working belt of the aluminum extrusion die or the design of the cavity size is wrong and the flow rate ratio is seriously out of adjustment. (2) The working of aluminum Panel extrusion die has obstruction angle and flow promotion angle. (3) The gap between the upper and lower molds of the aluminum panel extrusion die is relatively poor. (4) The working belts of the upper and lower dies of the aluminum panel extrusion die are not parallel, and there are horns. (5) The upper die resistance (division) flo
阅读全文