the Construction Method of Dry Hanging Aluminum Composite Panel in the Hall

As a Perforated Metal Sheets Factory, share with you. Aluminum composite panel must be very common in decoration and have good use value. As a new type of decoration material, they are widely used in building exterior walls. Construction projects such as curtain wall panels and old building renovations are favored by consumers for their excellent processing performance, excellent fire resistance and convenient construction methods. Speaking of the dry-hanging construction method of aluminum-plastic composite panels, I believe you can’t wait to learn about it. Here are some detailed illustrations about the construction methods of dry-hanging aluminum composite panels in the hall, hoping to help everyone.

Dry-hanging aluminum-plastic panel construction in the hall:

1. The laying-out work is carried out according to the actual centerline and elevation points of the civil construction; the design of the finish is based on the axis of the building. The aluminum-plastic panel frame is composed of horizontal and vertical pieces. The position line of the vertical rods is first played, and then the The anchor point of the vertical rod is determined.

2. Install the fixed connecting parts on the basis of laying out the wires, and fix the connecting parts by electric welding, with the anti-rust paint at the welding seam twice. The connecting piece is welded and fixed with the embedded piece on the main structure. When the embedded iron piece is not embedded on the main structure, the main structure can be drilled to install expansion bolts to fix the connecting iron piece.

3. Install the skeleton by welding. Check the elevation and center line position at any time during installation. At the same time, the cross-section connection welds are treated with anti-rust paint, and the fixed connection parts are concealed. The inspection records include the length, thickness, and position of the connection parts. Set the elevation, quantity, and embedding depth.

4. Install the aluminum-plastic panel on the inner frame of the profile, first tap and mill the screw holes, and use rivets to fix the aluminum-plastic panel on the profile steel frame one by one; the gap between the panels is 10～15mm and then the silicone is injected Weather-resistant sealant; it is strictly forbidden to disassemble the packaging paper before the installation of the aluminum plate, until the protective film of the packaging is torn off before completion; construct according to the direction indicated by the arrow of the aluminum-plastic plate.

Our company also has Splashback Aluminum Composite Panel on sale, welcome to contact us.

评论

发表评论

此博客中的热门博文

Repair the Surface of Aluminum Composite Panel

图片
Aluminum-plastic composite panel is a product that is often used in life. This type of product is used in many places. For many people, it has a very good effect. It is also often used in the home improvement industry, but because of the workmanship. There will be some differences between different types of plates, resulting in products that don’t look very good. What should we do to deal with this situation? First of all, we must understand what causes the color difference of the plates, and work with   Perforated Metal  Sheets Factory ! 1. Reasons for raw materials. The supplier is different. The difference of suppliers has a great influence on the control of color production. Almost all the raw materials of the paint factory come from different places. If different suppliers are required to prepare the same color, there are actually differences in raw materials. Sometimes the same supplier also has the problem of differences in raw materials of different habits. 2. Equipment reasons
阅读全文

Can the Aluminum Alloy of the Can Replace the Aluminum Alloy of the Aluminum Sheet?

图片
  As a   Perforated Metal Sheets Factory , share with you. As we all know, the curtain wall aluminum veneer is made of aluminum alloy. The Coca-Cola cans are also made of aluminum alloy. However, most people think that aluminum alloys are the same, and there is no difference. In fact, they are different. The aluminum alloy used in cans cannot meet the basic mechanical properties of curtain wall aluminum veneers. 3104 aluminum alloy is used for the can body, 5052 aluminum alloy is used for the lid and pull ring of the can; and the aluminum alloy used for the aluminum veneer of the curtain wall is 1100 and 3003 aluminum alloy. Because of the different models of aluminum alloys, their mechanical properties are also different. For example, the ultimate tensile strength of 6061 aluminum alloy is 124MPa, the tensile yield strength is 55.2MPa, the elastic modulus is 68.9GPa, and the bending ultimate strength is 228MPa. It is usually used in aviation and shipbuilding. The mechanical performanc
阅读全文

the Cause of the Uneven Surface of the Aluminum Panel

图片
The application of aluminum veneer is more and more widespread, and the uneven surface of the aluminum sheet is one of the problems that everyone often encounters. So what is the cause of the uneven surface of the aluminum veneer? In fact, there are many reasons, such as: aluminum sheet Extrusion die setting problems, support pad problems, etc.   Perforated Metal Sheets Factory   will tell you the specific reasons for the uneven surface of the aluminum veneer: (1) The length ratio of the working belt of the aluminum extrusion die or the design of the cavity size is wrong and the flow rate ratio is seriously out of adjustment. (2) The working of aluminum Panel extrusion die has obstruction angle and flow promotion angle. (3) The gap between the upper and lower molds of the aluminum panel extrusion die is relatively poor. (4) The working belts of the upper and lower dies of the aluminum panel extrusion die are not parallel, and there are horns. (5) The upper die resistance (division) flo
阅读全文